Skip to content
Tavistock Plumbing

Hard water, softened

Water softeners in Tavistock

Tavistock's water comes from underground aquifers, and groundwater carries minerals that leave scale on taps, heaters and glassware. Tavistock Plumbing repairs and installs water softeners, and fits filtration and reverse osmosis where they help. We test your water first and give you a written price before any part is fitted. To start, ask for a quote.

Test the water first, then size the softener to the house.

A leaking softener can be bypassed while you wait

If water is pooling around the softener or the brine tank, find the bypass valve on the head of the unit. It is usually a single handle or a pair of knobs where the pipes meet the softener. Turn it to bypass and the house keeps running water, just hard water, while the softener sits idle. Then unplug the unit so it does not start a regeneration cycle overnight.

If you cannot find a bypass, closing the valves on the pipes going in and out of the softener does the same job. If the leak is from the house pipes rather than the softener, shut the main valve and see emergency plumbing.

Once it is bypassed, a softener fault can wait for a booked visit. Hard water for a few days does no harm to people or to the plumbing. A steady leak onto a finished floor is the part not to leave.

Hard water shows up in small ways first

Most people notice the white crust before anything else: on the shower head, around the base of the kitchen tap, inside the kettle. Glasses come out of the dishwasher cloudy. Soap does not lather well, and a film stays on the tub. These are minerals the groundwater picked up on its way to the tap.

Scale also builds up inside appliances, where it is harder to see. It settles at the bottom of a tank water heater and coats the heat exchanger of a tankless unit, so both work harder for the same hot water. In the newer houses of Taylor Heights and The Orchards, scale in heaters and fixtures is one of the usual problems, even where the pipes themselves are young. If your heater has started rumbling or running short, see water heaters as well.

If you already have a softener and these signs are coming back, the softener is the first thing to check.

Most softener faults have plain causes

A softener that has stopped softening is usually one of a few things. Salt can form a hard crust, called a bridge, above the water in the brine tank, so the tank looks full but the softener draws no brine. The control valve may have lost its settings after a power cut, or its timer may be regenerating on the wrong schedule. The injector or the brine line can clog with sediment. Less often, the resin bed inside the tank has worn out and no longer holds on to minerals.

You can check for a salt bridge yourself: press gently on the salt with a broom handle. If it breaks through to a hollow, that was the problem. Anything inside the control valve is best left to the plumber.

On the visit we test the water before and after the softener, so the repair is based on a measured reading. If a part will fix it, we say so. If the unit is near the end of its life, we tell you that too, with both prices written down.

Sizing starts with a hardness test at your tap

Groundwater hardness varies from one system to another, and we do not assume a number for your house. For a sense of how hard it can get nearby, Oxford County reports a range of 806 to 1317 mg/L (47 to 77 grains per gallon) for the Innerkip Drinking Water System, and notes that many households there use softeners to cut down white calcium deposits and help soap work.

We measure the hardness at your tap, then size the softener to that reading and to the number of people and bathrooms in the house. An undersized unit regenerates too often and wastes salt. An oversized one costs more than it needs to. The written price shows the size we chose and why.

Filtration and reverse osmosis do different jobs

A softener removes the minerals that cause scale. It does not take out much else, and it swaps those minerals for a small amount of sodium. Tavistock's water already has some sodium naturally: Southwestern Public Health lists it at 18.7 to 21.0 mg/L. If anyone in the house is watching their sodium, that is worth knowing.

A reverse osmosis system under the kitchen sink is the usual answer. It filters drinking and cooking water through a fine membrane, removing most of the sodium along with other dissolved solids, and runs to its own small tap. Sediment or carbon filtration on the main line is a separate option, for grit or taste. We explain what each one does to your water and let you choose, rather than adding all three.

How a softener visit goes

We start with what you have noticed and test the water. For a repair, we check the brine tank, the control valve and the drain line, then give you a written price before any part is fitted. For a new installation, we look at where the water line enters the house, plan a bypass so the unit can be serviced later, and run the softener's drain line to a proper drain with an air gap.

Work is performed by licensed plumbers (306A Certificate of Qualification). Before we leave, we set the regeneration schedule to your hardness reading and show you the bypass and how to top up the salt. Keep the manufacturer's paperwork; registering the unit with the manufacturer is usually what keeps its warranty valid. For other leaks or fixtures, see plumbing repairs.

How the work is done

What you can count on from the first call

  • Licensed and insured

    Every plumber holds a current 306A Certificate of Qualification and is covered by liability insurance. Your home is protected on every job.

  • Every call is answered

    Day or night, a person or our receptionist answers, takes the details and a plumber calls you back.

  • Written price before work starts

    You see the number and approve it before any part is fitted. No surprises on the invoice.

  • 1-year workmanship warranty

    All labour comes backed by a one-year warranty. If a repair we made fails within the warranty period, we return and fix it at no additional labour cost.

Tell us what the water is doing

Describe the problem and we arrange the visit. You see a written price before any work starts.